Qiitaにも書いてるけどこっちにも転記
qiita.com
ボリューム拡張が必要になってくると思うのでその覚書
基本的にCentOS系のOSで検証をしているけど、Debianでも使えると思う
前提条件:VirtualBoxのHDDがVDI形式であること
vmdkだと可変ではないので拡張できない、そういった場合は別のHDDを作ってそれをアタッチメントすればよい
以下はVirtualBoxで拡張後にゲストOS内で認識させる方法
fdiskを実行して新規パーティションを立てる
ブロックサイズは認識されているので基本的にはおおもとの/dev/sdaを参照する。
/dev/sdaは
[root@localhost ~]# fdisk /dev/sda
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): p
Disk /dev/sda: 33.3 GB, 33263140864 bytes ★ ここが 現時点のサイズと違う状態であれば使っていない空間がある
255 heads, 63 sectors/track, 4044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00070a84
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 1306 9972736 8e Linux LVM
パーティションを新規に作成するので"n"を選択して作成
Command (m for help): n
Command action
e extended
p primary partition (1-4) ★ 基本はこっちを選択する
p
今回はパーティション3を作成する。
限定的な容量追加など特別の事情がない限り後はデフォルトでOK
Partition number (1-4): 3
First cylinder (1306-4044, default 1306):
Using default value 1306
Last cylinder, +cylinders or +size{K,M,G} (1306-4044, default 4044):
Using default value 4044
確認のため"p"で確認をする。
Command (m for help): p
Disk /dev/sda: 33.3 GB, 33263140864 bytes
255 heads, 63 sectors/track, 4044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00070a84
Device Boot Start End Blocks Id System
/dev/sda1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 64 1306 9972736 8e Linux LVM
/dev/sda3 1306 4044 21997670 83 Linux ★ここが追加されていればOK